X Close Panel

Contact Us

Interested in learning more about Bondhus?  Contact us and we'll get back to you with the information you're looking for.

Find Us

Bondhus Corporation
1400 E. Broadway
P.O. Box 660
Monticello, Minnesota 55362

Phone: 800-328-8310
Hours: 7:00 AM to 5:00 PM CST

 

  • Available in a wide range of lengths and tip styles
  • Chamfered tips for faster insertion and full tool engagement in the screw head
  • Tools are made with Protanium® steel which is heat treated for more torque and longer tool life
  • Three finish options available


 
 

High Torque Steel:
Up to 20% stronger, with more torque and twice the wear resistance of standard grades of steel.

 

Corrosion-resistant finish:
Environmentally safe, provides better tool grip, resists solvents, and is 5 times more corrosion resistant than competitor finishes.

 

Next generation chrome finish:
Traditional plated tool look with superior protection and durability.

 

Real 14 karat gold finish:
Superior protection and durability over traditional chrome and the look and shine of real gold

 

More than just another L-Wrench

Bondhus is committed to making the best tools on the market. Bondhus is constantly working to improve our tools. We are never satisfied with “good enough.” We work hard to make sure your new Bondhus L-Wrench is always the best tool for the job.

 

Precision machining is critical for a ball end tool to function optimally. Understandably, the smaller a ball end tip is, the more complex the task of machining becomes.

Bondhus maintains incredibly tight tolerances and close clearances between ball end tips and the screw head walls. Bondhus machining accurately maintains the precise geometric shape of the ball on all six sides. Surfaces are smooth, and corners are sharp and clean, even on a tool as small as .050” (1.27mm).

Precise machining results in Bondhus ball end tips having more surface area contacting the screw wall than any other competitor. Bondhus ball end tools far outwear the competition, and dramatically reduce stripping. Fastener wear is also greatly reduced.

 

 

 

 

 

Bondhus chamfers every Hex and TORX® tool we make. This process eliminates burrs and imperfections in the tool’s tip that can prevent the tool from fitting properly or seating fully within the screw head.
 

 

 

Every Bondhus tool is designed and machined to achieve an optimal fit between tool and fastener. Tools insert quickly and easily into screw head and fit snug to generate greater torque and minimize slipping and stripping.
 

Bondhus custom heat-treating produces tools that are highly resistant to breakage and shattering.

10937_copyBall End L-Wrenches - ProGuard™ Finish

  • Ball End inserts into screw at a 25° angle
  • Ball End saves time by quickly funneling tool into screw
  • 25° angle allows natural hand and wrist movement
  • Superior Ball End strength and working angle
  • Works in hard to reach places

 


Cases are color-coded for easy recognition

Inch Yellow Icon Mectric Red          Ball-Tip     Ball End Tips

Ball End L-Wrench Sets

PART# MODEL# PCS LENGTH CONTENTS QTY SETS

Inch Sets

 
10945 BLX7 7 Long 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16" 1 Inch Yellow Icon
10932 BLX8 8 Long .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32" 1 Inch Yellow Icon
10938 BLX10 10 Long 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4" 1 Inch Yellow Icon
10936 BLX12 12 Long .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16" 1 Inch Yellow Icon
10937 BLX13 13 Long .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" 1 Inch Yellow Icon
10935 BLX15 15 Long .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, 1/2" (in vinyl roll up pouch) 1 Inch Yellow Icon
10933 MBLX13 13 Long .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" (in metal box) 1 Inch Yellow Icon
16037 BLX13XL 13 Extra Long .050, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8" 1 Inch Yellow Icon

Metric Sets

 
10946 BLX6M 6 Long 1.5, 2, 2.5, 3, 4, 5mm 1 Mectric Red
10992 BLX7M 7 Long 1.5, 2, 2.5, 3, 4, 5, 6mm 1 Mectric Red
10999 BLX9M 9 Long 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm 1 Mectric Red
10990
BLX10M 10 Long 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8, 10mm  (INCLUDES 7mm) 1  
10995 BLX15M 15 Long 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10mm 1 Mectric Red
10989 MBLX13 13 Long

1.27, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 14, 17mm
(in metal box)

1 Mectric Red
16099 BLX9MXL 9 Extra Long 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm 1 Mectric Red

Long Inch Ball End L-Wrench Singles

 

Single

Packaged

 

Bulk

     
  SIZE INCH MM INCH MM PART# QTY   PART# QTY   PART# QTY SINGLES
Ball-L-wr-PG LONG Inch Singles            
.050 2.8 72 0.53 13 10902 10   12902 100   15702 10 Inch Yellow Icon
1/16 3.0 76 0.56 14 10903 10   12903 100   15703 10 Inch Yellow Icon
5/64 3.2 81 0.61 15 10904 10   12904 100   15704 10 Inch Yellow Icon
3/32 3.4 86 0.65 16 10905 10   12905 100   15705 10 Inch Yellow Icon
7/64 3.6 90 0.70. 18 10906 10   12906 100   15706 10 Inch Yellow Icon
1/8 3.8 95 0.75 19 10907 10   12907 100   15707 10 Inch Yellow Icon
9/64 4.0 101 0.80 20 10908 10   12908 100   15708 10 Inch Yellow Icon
5/32 4.2 107 0.84 21 10909 10   12909 100   15709 10 Inch Yellow Icon
3/16 4.5 114 0.94 24 10910 10   12910 100   15710 10 Inch Yellow Icon
7/32 4.9 124 1.03 26 10911 5   12911 50   15711 5 Inch Yellow Icon
1/4 5.6 141 1.13 29 10912 5   12912 50   15712 5 Inch Yellow Icon
5/16 6.0 152 1.25 32 10913 5   12913 50   15713 5 Inch Yellow Icon
3/8 6.8 171 1.38 35 10914 5   12914 50   15714 5 Inch Yellow Icon
7/16 7.5 191 1.50 38 10915 1   12915 25   15715 1 Inch Yellow Icon
1/2 7.8 198 1.63 41 10916 1   12916 25   15716 1 Inch Yellow Icon
9/16 9.0 229 1.75 44 10917 1   12917 10   15717 1 Inch Yellow Icon
5/8 9.8 248 1.88 48 10918 1   12918 10   15718 1 Inch Yellow Icon
3/4 11.3 286 2.13 54 10919 1   12919 5   15719 1 Inch Yellow Icon
7/8 12.8 325 2.37 60 10920 1   - -   - - Inch Yellow Icon
1 14.2 362 2.62 67 10921 1   - -   - - Inch Yellow Icon

 

Long Metric Ball End L-Wrench Singles

 

Single

Packaged

 

Bulk

  157xx-metric-tagged Tagged/Barcoded  
  SIZE INCH MM INCH MM PART# QTY   PART# QTY   PART# QTY SINGLES

Ball-L-wr-PG

LONG Metric Singles            
1.27
2.8 72 0.53 13 10949
10   12949
100   15749
10 Mectric Red
1.5 3.0 77 0.53 14 10950 10   12950 100   15750 10 Mectric Red
2.0 3.2 82 0.61 16 10952 10   12952 100   15752 10 Mectric Red
2.5 3.5 88 0.69 17 10954 10   12954 100   15754 10 Mectric Red
3.0 3.9 98 0.75 19 10956 10   12956 100   15756 10 Mectric Red
3.5 3.9 100 0.85 21 10958 1   12958 100   15758 1 Mectric Red
4.0 4.3 110 0.87 22 10960 10   12960 100   15760 10 Mectric Red
4.5 4.5 114 1.00 25 10962 1   12962 100   15762 1 Mectric Red
5.0 4.7 119 1.06 27 10964 5   12964 100   15764 5 Mectric Red
5.5 4.9 124 1.14 29 10966 1   12966 50   15766 1 Mectric Red
6 5.5 139 1.22 31 10968 5   12968 50   15768 5 Mectric Red
7 5.5 140 1.30 33 10970 1   12970 50   15770 1 Mectric Red
8 6.0 152 1.38 35 10972 5   12972 50   15772 5 Mectric Red
9 6.2 159 1.46 37 10974 1   12974 50   15774 1 Mectric Red
10 6.7 171 1.54 39 10976 5   12976 50   15776 5 Mectric Red
11 7.9 200 1.63 42 10978 1   12978 25   15778 1 Mectric Red
12 8.7 220 1.73 44 10980 1   12980 25   15780 1 Mectric Red
13 9.4 240 1.88 48 10982 1   12982 10   15782 1 Mectric Red
14 10.2 260 2.15 55 10984 1   12984 10   15784 1 Mectric Red
17 11.0 280 2.42 61 10986 1   12986 10   15786 1 Mectric Red
19 11.6 295 2.70 69 10988 1   12988 5   15788 1 Mectric Red
22 13.0 330 3.07 78 10991 1   - -   - - Mectric Red
24 14.5 370 3.47 88 10993 1   - -   - - Mectric Red

 

Extra Long Ball End L-Wrench Singles

 

Single

Packaged

 
SIZE INCH MM INCH MM PART# QTY SINGLES
Ball-L-wr-XL-PG EXTRA LONG Inch Singles
.050 3.1 77 0.53 13 16002 10 Inch Yellow Icon
1/16 3.3 85 0.56 14 16003 10 Inch Yellow Icon
5/64 3.6 92 0.61 15 16004 10 Inch Yellow Icon
3/32 3.9 99 0.65 16 16005 10 Inch Yellow Icon
7/64 4.1 105 0.70 18 16006 10 Inch Yellow Icon
1/8 4.5 114 0.75 19 16007 10 Inch Yellow Icon
9/64 4.8 122 0.80 20 16008 10 Inch Yellow Icon
5/32 5.1 131 0.84 21 16009 10 Inch Yellow Icon
3/16 5.2 132 0.94 24 16010 10 Inch Yellow Icon
7/32 5.6 143 1.03 26 16011 5 Inch Yellow Icon
1/4 6.5 164 1.13 29 16012 5 Inch Yellow Icon
5/16 7.1 180 1.25 32 16013 5 Inch Yellow Icon
3/8 7.8 199 1.38 35 16014 5 Inch Yellow Icon
Ball-L-wr-XL-PG EXTRA LONG Metric Singles
1.5 3.5 90 0.53 14 16050 10 Mectric Red
2.0 3.9 100 0.61 16 16052 10 Mectric Red
2.5 4.4 112 0.69 17 16054 10 Mectric Red
3.0 5.0 126 0.75 19 16056 10 Mectric Red
4.0 5.6 142 0.87 22 16060 10 Mectric Red
5.0 6.3 160 1.06 27 16064 5 Mectric Red
6 6.8 172 1.22 31 16068 5 Mectric Red
8 7.7 195 1.38 35 16072 5 Mectric Red
10 8.4 213 1.54 39 16076 5 Mectric Red